PM: Lowtorious @pirate4x4
This was when this motor was fresh. Only 1K miles on it if that. 
'87 Block 22RE block
engnbldr.com "high out put" new cast head w/ over sized stainless valves
DOA 270 cam
.040" over engnbldr.com cast pistons
rew rods, machined '87 crank
stock flywheel
DOA Thorley header to 2.25" exhaust incl. cat and Flow Master 50 muffler
cleaned stock injectors
new TPS
intake was spotless inside
stock ignition @ stock timing, new plugs, cap, wires and rotor
If I remember right it was about 50*

ran through the stock W56 trans a single case
stock 4.10s with heavy ass 245/75/16 MTRs on T100 steel wheels.